Profoto D2 IndustrialThe light for high volume image production
Industrial mass production of images puts
more stress on lighting equipment than traditional studio photography.
That´s why we redesigned D2 Industrial with selected long-life components in every critical part, including:
- The
long-life Quartz flash tube
- The
upgraded internal circuit boards. (Panel board, Power unit)
Even the firmware is specially designed
with a special industrial feature set and
adjusted parameters to prolong lifetime in mass production.
Predictive maintenance
-
D2 INDUSTRIAL has passed extreme tests
during the design phase. The test results has formed the conditions for the built-in service indicators that lets you know when it is time for
service and to replace the flashtube*
- The D2 INDUSTRIAL firmware also includes
a flash
counter that cannot be reset. This will
enable to user to follow the “flash mileage” on each unit.
* For optimal colour consistency
& flash output, flashtubes should be replaced once the indicator is
activated.
E-commerce is booming!
-
The
boom of E-commerce drives a need for heavy mass
production of high quality images.
- Mass
production prerequisites is Reliability
and Productivity.
- To
increase productivity the trend is towards Automation.
- The
majority of today´s D2 and Pro-10 sales goes to in-house studios. These
companies need an active
supplier who can offer a complete solution and
customized support
Flash:
- Quick burst: Up to 20 flashes/s
- Flash duration Normal mode (t0.5): 1/1,600 s (1000 Ws) – 1/11,000 s (2 Ws)
- Flash duration Freeze mode (t0.5): 1/1,600 s (1000 Ws) – 1/50,000 s (2 Ws)
- Max energy. 1000 Ws
- Energy range. 10f-stops (2-1000 Ws)
- Energy control increments: 1/10 or full f-stops
- Recycling time: 0.03 – 1.2 s
- Energy stability: +/- 1/20 f-stop
- Color stability Normal mode: +/- 150 K over range. +/- 20 K flash to flash
- Color stability Freeze mode: +/- 1200 K over range. +/- 100 K flash to flash
Modeling light
- Selectable settings: Max, Prop, Free, Off
- Max power: Max 300 W (Halogen)
Profoto AirX (Bluetooth Low Energy technology)
- Frequency band: 2.4 GHz (2404 to 2479.3 MHz)
- Radio power output: Maximum 9.9 dBm
- No. of frequency channels: 20 (1-20)
Powering
- Input power supply: 100-127 V / 200-240 V, 50/60 Hz (nominal)
- Mains fuse requirement: 6 A/ 230 V, 10 A/ 120V
Operating environment
- Operation temperature: +10 C to +35 C (-10 C to +50 C with reduced performance)
- Storage temperature: -20 C to +60 C
Measurements
- Width: 13 cm
- Length: 31 cm
- Height: 18 cm
- Weight:3.4 kg